DMS load cell with measuring amplifier HX711AD
Zur Navigation springen
Zur Suche springen
| Autor: | Onyesi John Abiagam |
| Sprache: | DE EN |
Introduction
Requirements
| Req. | Description | Priority |
|---|---|---|
| 1 | The mass must be determined using the HX711AD load cell via Arduino and Simulink. | 1 |
| 2 | The measuring range must be determined. | 1 |
| 3 | The measurement uncertainty (1σ) must be determined for the measuring range and displayed as a confidence interval. | 2 |
| 4 | The on/off button starts the system. The sensor must first be calibrated and display 0 g. |
1 |
| 5 | The weight must be referenced for the measuring range. | 1 |
| 6 | The measured values must be filtered/smoothed over time. | 1 |
| 7 | A beep must indicate when the measured value is stable/constant. | 1 |
| 8 | The sensor system must display the weight in g on a display. | 1 |
| 9 | The tara button resets the current weight to 0 g (recalibration). |
1 |
Working principle
Technical Overview
Pin Assignment
Measurement method
Measuring Circuit
Software
Arduino IDE
Simulink
Measurement
Video
Datasheets
Related Links
SVN-Repository
https://svn.hshl.de/svn/HSHL_Projekte/trunk/Arduino_Sensorsammlung
→ zurück zum Hauptartikel: HSHL-Mechatronik-Baukasten | Arduino Sensorsammlung | Sensorinbetriebnahme mit Arduino und Simulink