Geschwindigkeitsmessstrecke mit Arduino

Aus HSHL Mechatronik
Zur Navigation springen Zur Suche springen


Author: Syed Rafsan Ishtiaque
Category: Part of Main Internship
Duration: 02.05.2023 - 00:00:0000
Supervisor: Prof. Dr.-Ing Ulrich Schneider


Objective

Developing the speed measuring unit for any car project

Hardware

Sensor

1. Sharp 2D120X F 09

The Sharp distance measuring sensor is used to determine the speed/ velocity of the car unit. In this case, two identical sensors were used. According to the manufacturer SHARP, the range of the sensor is 4 cm to 30 cm, typical response time apprx. 39 ms, typical start up delay apprx. 44 ms, Average Current Consumption: 33 mA. The operating temperature is -10°C to 60°C, so that is ideal for this project as it is initially an indoor project. according to the stamp on the sensor, the manufacturing date was September 2016. According to the data sheet, the sensor should be mounted on any frame in such way that it gives the optimum result. For that the general instructions are available on the Data Sheet.