https://wiki.hshl.de/wiki/index.php?action=history&feed=atom&title=Rapid_Prototyping_Labor_%28EN%29 Rapid Prototyping Labor (EN) - Versionsgeschichte 2026-04-21T15:47:04Z Versionsgeschichte dieser Seite in HSHL Mechatronik MediaWiki 1.43.0 https://wiki.hshl.de/wiki/index.php?title=Rapid_Prototyping_Labor_(EN)&diff=135904&oldid=prev Cristian.nicosia@stud.hshl.de: /* Laboratory Supervisors */ 2025-05-27T09:29:34Z <p><span class="autocomment">Laboratory Supervisors</span></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="de"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Nächstältere Version</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Version vom 27. Mai 2025, 09:29 Uhr</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l7">Zeile 7:</td> <td colspan="2" class="diff-lineno">Zeile 7:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Laboratory Supervisors ==  </div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Laboratory Supervisors ==  </div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div> </div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">&lt;br&gt;</ins></div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&#039;&#039;&#039;Lead Professor:&#039;&#039;&#039; [[Benutzer:David Grieshammer|Prof. David Grieshammer]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&#039;&#039;&#039;Lead Professor:&#039;&#039;&#039; [[Benutzer:David Grieshammer|Prof. David Grieshammer]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> </table> Cristian.nicosia@stud.hshl.de https://wiki.hshl.de/wiki/index.php?title=Rapid_Prototyping_Labor_(EN)&diff=135903&oldid=prev Cristian.nicosia@stud.hshl.de: /* Öffnungszeiten */ 2025-05-27T09:29:21Z <p><span class="autocomment">Öffnungszeiten</span></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="de"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Nächstältere Version</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Version vom 27. Mai 2025, 09:29 Uhr</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l27">Zeile 27:</td> <td colspan="2" class="diff-lineno">Zeile 27:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;/gallery&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;/gallery&gt;</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>== <del style="font-weight: bold; text-decoration: none;">Öffnungszeiten </del>==  </div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>== <ins style="font-weight: bold; text-decoration: none;">Opening Hours</ins>==  </div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt;</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>  &#039;&#039;&#039;Monday:&#039;&#039;&#039; 10:00 AM to 4:00 PM</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>  &#039;&#039;&#039;Monday:&#039;&#039;&#039; 10:00 AM to 4:00 PM</div></td></tr> <!-- diff cache key mtrwiki:diff:1.41:old-135902:rev-135903:php=table --> </table> Cristian.nicosia@stud.hshl.de https://wiki.hshl.de/wiki/index.php?title=Rapid_Prototyping_Labor_(EN)&diff=135902&oldid=prev Cristian.nicosia@stud.hshl.de: /* Laser Cutting */ 2025-05-27T09:28:18Z <p><span class="autocomment">Laser Cutting</span></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="de"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Nächstältere Version</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Version vom 27. Mai 2025, 09:28 Uhr</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l173">Zeile 173:</td> <td colspan="2" class="diff-lineno">Zeile 173:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Laser Cutting ==</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Laser Cutting ==</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt;</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">Der </del>FabCore <del style="font-weight: bold; text-decoration: none;">ist ein </del>CO₂<del style="font-weight: bold; text-decoration: none;">-Lasercutter</del>, <del style="font-weight: bold; text-decoration: none;">der für den Einsatz in Bildungseinrichtungen</del>, <del style="font-weight: bold; text-decoration: none;">Werkstätten und kleinen Unternehmen konzipiert ist</del>. <del style="font-weight: bold; text-decoration: none;">Er wird als Desktop</del>-<del style="font-weight: bold; text-decoration: none;">Gerät angeboten und ist für Schneid- und Gravurarbeiten an nicht-metallischen Materialien wie Holz</del>, <del style="font-weight: bold; text-decoration: none;">Acryl</del>, <del style="font-weight: bold; text-decoration: none;">Leder oder Papier geeignet</del>. <del style="font-weight: bold; text-decoration: none;">Die Maschine verfügt über eine vollständig geschlossene Bauweise mit Sicherheitsmerkmalen wie Türverriegelung</del>, <del style="font-weight: bold; text-decoration: none;">Not-Aus-Schalter und Schlüsselschalter</del>. <del style="font-weight: bold; text-decoration: none;">Die Steuerung erfolgt über die Software </del>LightBurn, <del style="font-weight: bold; text-decoration: none;">mit der verschiedene Vektor- und Bilddateiformate verarbeitet werden können</del>. <del style="font-weight: bold; text-decoration: none;">Die Fokussierung des Lasers erfolgt manuell</del>. <del style="font-weight: bold; text-decoration: none;">Eine Luftunterstützung (Air Assist) ist integriert, um saubere Schnitte zu ermöglichen</del>. <del style="font-weight: bold; text-decoration: none;">Der Aufbau der Maschine basiert auf einem Rahmen aus eloxiertem Aluminium mit Linearschienen für die </del>XY<del style="font-weight: bold; text-decoration: none;">-Achsen</del>.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">The </ins>FabCore <ins style="font-weight: bold; text-decoration: none;">is a </ins>CO₂ <ins style="font-weight: bold; text-decoration: none;">laser cutter designed for use in educational institutions</ins>, <ins style="font-weight: bold; text-decoration: none;">workshops</ins>, <ins style="font-weight: bold; text-decoration: none;">and small businesses</ins>. <ins style="font-weight: bold; text-decoration: none;">It is offered as a desktop device and is suitable for cutting and engraving non</ins>-<ins style="font-weight: bold; text-decoration: none;">metallic materials such as wood, acrylic</ins>, <ins style="font-weight: bold; text-decoration: none;">leather</ins>, <ins style="font-weight: bold; text-decoration: none;">or paper</ins>. <ins style="font-weight: bold; text-decoration: none;">The machine features a fully enclosed design with safety features including a door lock, emergency stop button</ins>, <ins style="font-weight: bold; text-decoration: none;">and key switch</ins>.</div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Control is managed via </ins>LightBurn <ins style="font-weight: bold; text-decoration: none;">software</ins>, <ins style="font-weight: bold; text-decoration: none;">which supports various vector and image file formats</ins>. <ins style="font-weight: bold; text-decoration: none;">The laser focusing is manual</ins>. <ins style="font-weight: bold; text-decoration: none;">An integrated air assist helps achieve clean cuts</ins>. <ins style="font-weight: bold; text-decoration: none;">The machine’s structure is based on an anodized aluminum frame with linear rails for the </ins>XY <ins style="font-weight: bold; text-decoration: none;">axes</ins>.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt;</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Datei:FabCore 40W Laser Cutter.jpg|left|thumb|600px|FabCore Laser Cutter]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Datei:FabCore 40W Laser Cutter.jpg|left|thumb|600px|FabCore Laser Cutter]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>  '''<del style="font-weight: bold; text-decoration: none;">Laserleistung</del>:''': <del style="font-weight: bold; text-decoration: none;">40 W </del>CO₂<del style="font-weight: bold; text-decoration: none;">-Laserröhre</del></div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>  '''<ins style="font-weight: bold; text-decoration: none;">Laser Power</ins>:''': <ins style="font-weight: bold; text-decoration: none;">40 W </ins>CO₂ <ins style="font-weight: bold; text-decoration: none;">Laser Tube</ins></div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>  '''<del style="font-weight: bold; text-decoration: none;">Arbeitsbereich</del>:''' 600 × 300 mm</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>  '''<ins style="font-weight: bold; text-decoration: none;">Working Area</ins>:''' 600 × 300 mm</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>  '''<del style="font-weight: bold; text-decoration: none;">Maximale Materialstärke</del>:''' <del style="font-weight: bold; text-decoration: none;">Bis zu 12 mm Pappelsperrholz oder 10 mm Acryl </del>(<del style="font-weight: bold; text-decoration: none;">materialabhängig</del>)</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>  '''<ins style="font-weight: bold; text-decoration: none;">Maximum Material Thickness</ins>:''' <ins style="font-weight: bold; text-decoration: none;">Up to 12 mm poplar plywood or 10 mm acrylic </ins>(<ins style="font-weight: bold; text-decoration: none;">depending on the material</ins>)</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>  '''<del style="font-weight: bold; text-decoration: none;">Unterstützte Formate</del>:''' SVG, DXF, AI, PDF, BMP, PNG, JPG, HPGL, PLT</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>  '''<ins style="font-weight: bold; text-decoration: none;">Supported Formats</ins>:''' SVG, DXF, AI, PDF, BMP, PNG, JPG, HPGL, PLT</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>  '''<del style="font-weight: bold; text-decoration: none;">Fokus</del>:''' <del style="font-weight: bold; text-decoration: none;">Manuelle Fokusverstellung über mitgeliefertes Werkzeug</del></div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>  '''<ins style="font-weight: bold; text-decoration: none;">Focus</ins>:''' <ins style="font-weight: bold; text-decoration: none;">Manual focus adjustment using the supplied tool</ins></div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>  '''<del style="font-weight: bold; text-decoration: none;">Konnektivität</del>:''' USB<del style="font-weight: bold; text-decoration: none;">-Verbindung zum Rechner oder Dateitransfer </del>via USB<del style="font-weight: bold; text-decoration: none;">-Stick</del></div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>  '''<ins style="font-weight: bold; text-decoration: none;">Connectivity</ins>:''' USB <ins style="font-weight: bold; text-decoration: none;">connection to the computer or file transfer </ins>via USB <ins style="font-weight: bold; text-decoration: none;">stick</ins></div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>  '''Software:''' <del style="font-weight: bold; text-decoration: none;">Kompatibel mit </del>LightBurn</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>  '''Software:''' <ins style="font-weight: bold; text-decoration: none;">Compatible with </ins>LightBurn</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>  &lt;br&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>  &lt;br&gt;</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;div style=&quot;clear: both;&quot;&gt;&lt;/div&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;div style=&quot;clear: both;&quot;&gt;&lt;/div&gt;</div></td></tr> </table> Cristian.nicosia@stud.hshl.de https://wiki.hshl.de/wiki/index.php?title=Rapid_Prototyping_Labor_(EN)&diff=135901&oldid=prev Cristian.nicosia@stud.hshl.de: /* Waschen */ 2025-05-27T09:21:51Z <p><span class="autocomment">Waschen</span></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="de"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Nächstältere Version</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Version vom 27. Mai 2025, 09:21 Uhr</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l149">Zeile 149:</td> <td colspan="2" class="diff-lineno">Zeile 149:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>===== <del style="font-weight: bold; text-decoration: none;">Waschen </del>=====</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>===== <ins style="font-weight: bold; text-decoration: none;">Washing </ins>=====</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>After printing, the uncured resin must be removed from the model&#039;s surface. The CW1S uses a stainless steel tank filled with isopropyl alcohol and a magnetic propeller for this purpose. The movement of the propeller ensures that the liquid reaches every part of the model. This method is gentler than ultrasonic cleaning and is also suitable for very small objects.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>After printing, the uncured resin must be removed from the model&#039;s surface. The CW1S uses a stainless steel tank filled with isopropyl alcohol and a magnetic propeller for this purpose. The movement of the propeller ensures that the liquid reaches every part of the model. This method is gentler than ultrasonic cleaning and is also suitable for very small objects.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> </table> Cristian.nicosia@stud.hshl.de https://wiki.hshl.de/wiki/index.php?title=Rapid_Prototyping_Labor_(EN)&diff=135900&oldid=prev Cristian.nicosia@stud.hshl.de: /* Trocknen */ 2025-05-27T09:21:41Z <p><span class="autocomment">Trocknen</span></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="de"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Nächstältere Version</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Version vom 27. Mai 2025, 09:21 Uhr</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l156">Zeile 156:</td> <td colspan="2" class="diff-lineno">Zeile 156:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>===== <del style="font-weight: bold; text-decoration: none;">Trocknen </del>=====</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>===== <ins style="font-weight: bold; text-decoration: none;">Drying</ins>=====</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To avoid resin stains on a model, it should be dried beforehand.</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To avoid resin stains on a model, it should be dried beforehand.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td></tr> <!-- diff cache key mtrwiki:diff:1.41:old-135899:rev-135900:php=table --> </table> Cristian.nicosia@stud.hshl.de https://wiki.hshl.de/wiki/index.php?title=Rapid_Prototyping_Labor_(EN)&diff=135899&oldid=prev Cristian.nicosia@stud.hshl.de: /* Aushärten */ 2025-05-27T09:21:30Z <p><span class="autocomment">Aushärten</span></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="de"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Nächstältere Version</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Version vom 27. Mai 2025, 09:21 Uhr</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l162">Zeile 162:</td> <td colspan="2" class="diff-lineno">Zeile 162:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>===== <del style="font-weight: bold; text-decoration: none;">Aushärten </del>=====</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>===== <ins style="font-weight: bold; text-decoration: none;">Curing </ins>=====</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">Das Aushärten mit </del>UV<del style="font-weight: bold; text-decoration: none;">-Licht ist ein wichtiger Schritt im Harzdruckprozess</del>. <del style="font-weight: bold; text-decoration: none;">Gedruckte Objekte sind zunächst weich</del>. <del style="font-weight: bold; text-decoration: none;">Die </del>UV<del style="font-weight: bold; text-decoration: none;">-Behandlung verbessert ihre Festigkeit und Oberflächeneigenschaften</del>.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Curing with </ins>UV <ins style="font-weight: bold; text-decoration: none;">light is an important step in the resin printing process</ins>. <ins style="font-weight: bold; text-decoration: none;">Printed objects are initially soft</ins>. <ins style="font-weight: bold; text-decoration: none;">The </ins>UV <ins style="font-weight: bold; text-decoration: none;">treatment improves their strength and surface properties</ins>.</div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[Bild: Placeholder]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[Bild: Placeholder]</div></td></tr> </table> Cristian.nicosia@stud.hshl.de https://wiki.hshl.de/wiki/index.php?title=Rapid_Prototyping_Labor_(EN)&diff=135898&oldid=prev Cristian.nicosia@stud.hshl.de: /* Trocknen */ 2025-05-27T09:20:22Z <p><span class="autocomment">Trocknen</span></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="de"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Nächstältere Version</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Version vom 27. Mai 2025, 09:20 Uhr</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l157">Zeile 157:</td> <td colspan="2" class="diff-lineno">Zeile 157:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===== Trocknen =====</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===== Trocknen =====</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">Um Harzflecken an einem Modell zu vermeiden</del>, <del style="font-weight: bold; text-decoration: none;">sollte es vorher getrocknet werden</del>.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">To avoid resin stains on a model</ins>, <ins style="font-weight: bold; text-decoration: none;">it should be dried beforehand</ins>.</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[Bild: Placeholder]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[Bild: Placeholder]</div></td></tr> <!-- diff cache key mtrwiki:diff:1.41:old-135897:rev-135898:php=table --> </table> Cristian.nicosia@stud.hshl.de https://wiki.hshl.de/wiki/index.php?title=Rapid_Prototyping_Labor_(EN)&diff=135897&oldid=prev Cristian.nicosia@stud.hshl.de: /* Waschen */ 2025-05-27T09:19:16Z <p><span class="autocomment">Waschen</span></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="de"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Nächstältere Version</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Version vom 27. Mai 2025, 09:19 Uhr</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l150">Zeile 150:</td> <td colspan="2" class="diff-lineno">Zeile 150:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===== Waschen =====</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>===== Waschen =====</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">Nach dem Druck muss das ungehärtete Harz von der Modelloberfläche entfernt werden</del>. <del style="font-weight: bold; text-decoration: none;">Die </del>CW1S <del style="font-weight: bold; text-decoration: none;">nutzt dafür einen Edelstahltank mit Isopropylalkohol und einen Magnetpropeller</del>. <del style="font-weight: bold; text-decoration: none;">Die Bewegung des Propellers sorgt dafür, dass die Flüssigkeit jeden Teil des Modells erreicht</del>. <del style="font-weight: bold; text-decoration: none;">Dieses Verfahren ist schonender als die Ultraschallreinigung und eignet sich auch für sehr kleine Objekte</del>.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">After printing, the uncured resin must be removed from the model's surface</ins>. <ins style="font-weight: bold; text-decoration: none;">The </ins>CW1S <ins style="font-weight: bold; text-decoration: none;">uses a stainless steel tank filled with isopropyl alcohol and a magnetic propeller for this purpose</ins>. <ins style="font-weight: bold; text-decoration: none;">The movement of the propeller ensures that the liquid reaches every part of the model</ins>. <ins style="font-weight: bold; text-decoration: none;">This method is gentler than ultrasonic cleaning and is also suitable for very small objects</ins>.</div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[Bild: Placeholder]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[Bild: Placeholder]</div></td></tr> </table> Cristian.nicosia@stud.hshl.de https://wiki.hshl.de/wiki/index.php?title=Rapid_Prototyping_Labor_(EN)&diff=135896&oldid=prev Cristian.nicosia@stud.hshl.de: /* Vorwärmen des Harzes */ 2025-05-27T09:17:01Z <p><span class="autocomment">Vorwärmen des Harzes</span></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="de"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Nächstältere Version</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Version vom 27. Mai 2025, 09:17 Uhr</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l142">Zeile 142:</td> <td colspan="2" class="diff-lineno">Zeile 142:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;div style=&quot;clear: both;&quot;&gt;&lt;/div&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;div style=&quot;clear: both;&quot;&gt;&lt;/div&gt;</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>===== <del style="font-weight: bold; text-decoration: none;">Vorwärmen des Harzes </del>=====</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>===== <ins style="font-weight: bold; text-decoration: none;">Preheating the resin </ins>=====</div></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">Harze verändern ihren Zustand während der Lagerung</del>. <del style="font-weight: bold; text-decoration: none;">Daher sollten sie vor dem Gebrauch gut geschüttelt werden</del>. <del style="font-weight: bold; text-decoration: none;">Die </del>CW1S <del style="font-weight: bold; text-decoration: none;">kann das Harz zusätzlich vorwärmen. So erreicht es die ideale Temperatur für den Druck und sorgt für bessere Ergebnisse mit dem </del>SL1S.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Resins change their consistency during storage</ins>. <ins style="font-weight: bold; text-decoration: none;">Therefore, they should be shaken well before use</ins>. <ins style="font-weight: bold; text-decoration: none;">The </ins>CW1S <ins style="font-weight: bold; text-decoration: none;">can additionally preheat the resin, bringing it to the ideal temperature for printing and ensuring better results with the </ins>SL1S.</div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>&lt;br&gt; &lt;br&gt;</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[Bild: Placeholder]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[Bild: Placeholder]</div></td></tr> </table> Cristian.nicosia@stud.hshl.de https://wiki.hshl.de/wiki/index.php?title=Rapid_Prototyping_Labor_(EN)&diff=135895&oldid=prev Cristian.nicosia@stud.hshl.de: /* MSLA-3D-Print(Masked Stereolithography) */ 2025-05-27T09:15:25Z <p><span class="autocomment">MSLA-3D-Print(Masked Stereolithography)</span></p> <table style="background-color: #fff; color: #202122;" data-mw="interface"> <col class="diff-marker" /> <col class="diff-content" /> <col class="diff-marker" /> <col class="diff-content" /> <tr class="diff-title" lang="de"> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Nächstältere Version</td> <td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Version vom 27. Mai 2025, 09:15 Uhr</td> </tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l127">Zeile 127:</td> <td colspan="2" class="diff-lineno">Zeile 127:</td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Datei:Prusa CW1s.jpg|left|thumb|400px|Prusa CW1S Curing and Washing Machine]]</div></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Datei:Prusa CW1s.jpg|left|thumb|400px|Prusa CW1S Curing and Washing Machine]]</div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker" data-marker="−"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">Die </del>CW1S <del style="font-weight: bold; text-decoration: none;">unterstützt mehrere Arbeitsschritte im </del>3D<del style="font-weight: bold; text-decoration: none;">-Druckprozess</del>. <del style="font-weight: bold; text-decoration: none;">Vor dem Druck wird das Harz durch das Gerät vorgewärmt</del>. <del style="font-weight: bold; text-decoration: none;">Anschließend übernimmt es das Waschen</del>, <del style="font-weight: bold; text-decoration: none;">Trocknen und Aushärten der fertigen Modelle</del>. <del style="font-weight: bold; text-decoration: none;">Damit vereint die </del>CW1S <del style="font-weight: bold; text-decoration: none;">alle wichtigen Nachbearbeitungsfunktionen </del>in <del style="font-weight: bold; text-decoration: none;">einem kompakten System</del>.</div></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">The </ins>CW1S <ins style="font-weight: bold; text-decoration: none;">supports multiple steps in the </ins>3D <ins style="font-weight: bold; text-decoration: none;">printing process</ins>. <ins style="font-weight: bold; text-decoration: none;">Before printing, the device preheats the resin</ins>. <ins style="font-weight: bold; text-decoration: none;">Afterwards</ins>, <ins style="font-weight: bold; text-decoration: none;">it takes care of washing, drying, and curing the finished models</ins>. <ins style="font-weight: bold; text-decoration: none;">This way, the </ins>CW1S <ins style="font-weight: bold; text-decoration: none;">combines all essential post-processing functions </ins>in <ins style="font-weight: bold; text-decoration: none;">one compact system</ins>.</div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td colspan="2" class="diff-side-deleted"></td><td class="diff-marker" data-marker="+"></td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> <tr><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td><td class="diff-marker"></td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><br></td></tr> </table> Cristian.nicosia@stud.hshl.de